Steel palisade fencing, priced by the metre
W and D section pales, galvanised or powder coated, 1.8 m to 2.4 m and taller, with gates to match. See what the steel costs, what a contractor checks and what the planning rules allow.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- from €60 a metre1.8 m palisade, the parts, with VAT
- €87–€120 a metre2.4 m palisade, the parts
- 17 palesin every 2.75 m bay
- from €1,205a double vehicle gate

Price your palisade fence
Three taps and the price of the steel shows as you go. Your name and number come last, and only if you want a contractor to price the job.
2.4 m steel palisade, 25 to 100 m, supplied and fitted: €2,175 to €12,000.
How the price is worked out
The figure is what Irish sellers charge for the pales, rails and posts of a palisade run, a metre with VAT, times the length you pick. It covers galvanised, green and black, so it is a range. Corner posts, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Fences of 3 m and over, and GRP, are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after walking the line.
The fence, part by part
Each has its own page: what it costs, what to check on a quote and where it suits.
Steel palisadePales, rails and posts in 2.75 m bays. The parts start from €60 a metre.
Pales: W and D sectionThe two pale shapes, how thick they are and the heads on top.
GalvanisedHot-dip zinc, the working finish for yards, depots and compounds.
Powder coatedGreen, black and other RAL colours, put on over the galvanising.
Palisade gatesPedestrian gates from €640, double vehicle gates from €1,205.
GRP palisadeA fence that carries no current, for power, rail and water sites.From the price to the posts
Three steps. Nothing is booked until you say yes to a written price.
1Price it herePick the height, the length and the job. You see our price for the steel as you tap, before the planner asks for anything.
2One contractor walks the lineSend it and a single fencing contractor in your county rings to arrange a site visit. They look at the ground, the corners and the gates, and price the job in writing.
3It goes upPosts are concreted at 2.75 m centres, the rails go on as each post goes in, and the pales are bolted along the rails.
Suppliers list palisade parts for delivery in 7 days to 4 weeks, depending on the system, and stock gates in about 14 days. Ask the contractor for both dates on the quote.
What palisade costs
The steel, with VAT, from Irish sellers' price lists. Tap one for the full breakdown.

1.8 m palisade
from €60 a metrethe pales, rails and posts, with VATSee more →
2.0 m palisade
from €64 a metrethe pales, rails and posts, with VATSee more →
2.4 m palisade
from €87 a metrethe pales, rails and posts, with VATSee more →
Pedestrian gate
from €640single leaf, 1.2 m wideSee more →
Vehicle gate
from €1,205double leaf, 4 to 6 m wideSee more →
Spare parts
pales from €5.69one at a time, with VATSee more →Every height and finish, with runs worked out: palisade fencing cost per metre. The fitting is priced on a site visit, because the ground, the corners and the gates decide it.
Galvanised or powder coated?
Both start as the same galvanised steel. The coat on top is what changes.
Galvanised
- What it is
- The steel dipped in molten zinc, to ISO 1461
- Protection
- One coat of zinc
- Looks
- The grey of the zinc
- Where it suits
- Yards, depots, utility compounds
- 2.4 m parts, a metre
- about €87
- Gates
- Galvanised to match
Galvanised and powder coated
- What it is
- A polyester powder coat put on over the zinc
- Protection
- Two layers: zinc, then the colour
- Looks
- Green, black or another RAL colour
- Where it suits
- Frontages and sites the public sees
- 2.4 m parts, a metre
- €90 green, €92 black
- Gates
- Coated to match the line
More on each: galvanised palisade and powder coated palisade.
Heights, and what each one suits
A dig-in post is longer than the fence: the extra length goes into the concrete.
The standard for steel palisade is BS 1722-12:2016. It has two grades: general purpose fences up to 2.4 m, and security purpose fences of 3 m and 3.6 m, all with posts at 2.75 m centres. Palisade heights.
Palisade, railings or mesh?
Three boundaries that get called by each other's names.
Palisade
Steel pales, W or D in section, bolted to two or three rails between posts, with pointed or rounded heads. The points and the lack of footholds make it hard to climb.
Railings
Upright bars set in panels between posts. The planning exemption for house boundaries covers railings, and it rules out palisade.
Mesh panels
Welded wire panels on posts. You can see through them, so they suit a frontage that has to stay open to view or to CCTV.
The planning rule in four limits
Palisade is a security fence in the planning rules, and that changes what is exempt.
- At a house: no exemption. The exemption for walls, gates and fences around a house says no such structure may be a metal palisade or other security fence. Palisade there needs permission at any height.
- In cities and towns: 1.2 m. Away from a house, a new fence is exempt up to 1.2 m, or up to the height of the fence it replaces if that is taller, and never above 2 m.
- On rural land: 2 m. Outside cities and towns, a fence that is not sheet metal, and not at a house, is exempt to 2 m, or 3 m on land used for deer farming or conservation.
- Gates: 2 m. A gate away from a house is exempt to 2 m. Over these limits a palisade fence or gate needs permission, so a 2.4 m line round a yard or a business does.
Not sure which applies? A council can rule on it with a Section 5 declaration, for a fee of €80. All of it: planning permission for palisade fencing.
One contractor in your county
The planner asks for your county last, so your request goes to one fencing contractor who covers your county. There is no list and no ring-round.
Leinster
Dublin and the eleven counties around it
- Carlow
- Dublin
- Kildare
- Kilkenny
- Laois
- Longford
- Louth
- Meath
- Offaly
- Westmeath
- Wexford
- Wicklow
Munster
Cork and the south
- Clare
- Cork
- Kerry
- Limerick
- Tipperary
- Waterford
Connacht
Galway and the west
- Galway
- Leitrim
- Mayo
- Roscommon
- Sligo
Ulster
The three counties in the State
- Cavan
- Donegal
- Monaghan
Each county, grouped: counties covered.
What a good quote includes
Five things to see in writing before you say yes.
- The height and the grade. 1.8, 2.0 or 2.4 m, general purpose or security purpose, and the standard named.
- The pale. W or D section, its thickness in millimetres, and the head: triple point, single point or round.
- The finish. Galvanised, or galvanised and powder coated, with the RAL number of the colour.
- The length and the bays. Metres of fence, the number of 2.75 m bays, and every corner and end post.
- The posts. Dug in and concreted, with the footing size, or bolted down where the ground calls for it.
The other five, and why each matters: what a good quote includes.
Before you start
How much does palisade fencing cost?
The steel for a palisade fence costs €60 to €81 a metre at 1.8 m high, €64 to €85 a metre at 2.0 m and €87 to €120 a metre at 2.4 m, with VAT. That is the pales, rails and posts, supply only. Corner posts, gates and delivery are on top, and the fitting is priced on a site visit. The full price guide.
How much is a palisade gate?
A single pedestrian gate, 1.2 m wide, is €640 to €1,190 with VAT. A double vehicle gate is €1,205 to €3,990, set mostly by its width and height. Palisade gates.
Do I need planning permission for palisade fencing?
At a house, a palisade fence needs planning permission at any height: the exemption for house boundaries rules out metal palisade. In cities and towns, a new fence away from a house is exempt only up to 1.2 m, or the height of the fence it replaces, and never above 2 m. On rural land the limit is 2 m, or 3 m for deer farming or conservation. Planning permission.
What is the difference between W and D section palisade?
W section pales are folded into a corrugated W. D section pales have a rounded D profile and are often thicker, 3 mm against 2 mm. Palisade pales.
Is galvanised or powder coated palisade better?
Galvanised is the working finish for yards and compounds. Powder coat adds a colour over the zinc, so the steel has two layers of protection. At 2.4 m the parts are about €87 a metre galvanised and €90 green.
What VAT is charged on palisade fencing?
Bought on its own, palisade carries VAT at 23%, the rate in every price on this site. Supplied and fitted as a permanent fence, the job can go at 13.5%, but only while the materials cost no more than two-thirds of the price before VAT. VAT on palisade.
How long does it take to get palisade?
Suppliers list palisade parts for delivery in 7 days to 4 weeks, depending on the system, and stock gates in about 14 days. Ask the contractor for both dates on the quote.
Who rings me if I send my fence?
A single fencing contractor in your county, who already has your answers and our price. Your details go nowhere else. The contractor walks the line, prices the job in writing, and you decide whether to go ahead.
Everything on this site
The fence and its parts
Cost and the work
Rules and where it goes

See the price of the steel before anyone rings
Pick the height, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
