Palisade fencing cost per metre in Ireland
The steel for a palisade fence costs €60 to €81 a metre at 1.8 m high, €64 to €85 a metre at 2.0 m and €87 to €120 a metre at 2.4 m, with VAT. That is the pales, rails and posts, supply only. Corner posts, gates and delivery are on top, and the fitting is priced on a site visit.
Our price guide for the steel by height and finish, what gates and corners add, and why the fitting is priced on site.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- €60–€81 a metre1.8 m palisade, the parts, with VAT
- €87–€120 a metre2.4 m palisade, the parts
- €1,205–€2,721a 4 m double vehicle gate
- on a site visitwhere the fitting is priced

Our price guide
What the steel sells for in Ireland now, with VAT at 23%. Tap one for its sizes and checks.

1.8 m palisade
from €60 a metrethe pales, rails and posts, with VAT- Parts, a metre€60 to €81
- Parts, a 2.75 m bay€164 to €222
- Fittingpriced on a site visit

2.0 m palisade
from €64 a metrethe pales, rails and posts, with VAT- Parts, a metre€64 to €85
- Parts, a 2.75 m bay€176 to €233
- Fittingpriced on a site visit

2.4 m palisade
from €87 a metrethe pales, rails and posts, with VAT- Parts, a metre€87 to €120
- Parts, a 2.75 m bay€239 to €330
- Green D-pale kit€330 a bay

Pedestrian gate
from €640single leaf, 1.2 m wide- Galvanised, green or black€640 to €1,190
- Blue, red or white€1,439 to €1,700
- Delivery listedabout 4 weeks

Vehicle gate
from €1,205double leaf, 4 to 6 m wide- 4 m wide€1,205 to €2,721
- 5 m wide€1,490 to €3,385
- 6 m wide€1,820 to €3,990

Spare parts
pales from €5.69one at a time, with VAT- A pale€5.69 to €9.07
- A rail€21.38 to €28.34
- A corner post€54 to €85
A metre, by height and finish
1.8 m, W pale
- Galvanised
- €60 a metre
- Green
- €75 a metre
- Black
- €81 a metre
2.0 m, W pale
- Galvanised
- €64 a metre
- Green
- €79 a metre
- Black
- €85 a metre
2.4 m, W pale
- Galvanised
- €87 a metre
- Green
- €90 a metre
- Black
- €92 a metre
2.4 m, D pale 3 mm
- Galvanised
- €115 a metre, welded
- Green
- €120 a metre as a kit
Palisade goes up in bays 2.75 m wide. Each bay takes 17 pales, two rails and one post, and a straight run needs one more post to close it. A corner post goes at every change of direction. These figures are the pales, rails and posts of one bay, divided by its 2.75 m. Palisade is sold by the bay or by the metre: a 2.4 m bay of parts is €239 to €330 a bay.
Price your palisade fence
Three taps and the price of the steel shows as you go. Your name and number come last, and only if you want a contractor to price the job.
2.4 m steel palisade, 25 to 100 m, supplied and fitted: €2,175 to €12,000.
How the price is worked out
The figure is what Irish sellers charge for the pales, rails and posts of a palisade run, a metre with VAT, times the length you pick. It covers galvanised, green and black, so it is a range. Corner posts, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Fences of 3 m and over, and GRP, are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after walking the line.
Buying palisade for your own crew
Palisade for sale in Ireland comes three ways: as single parts (pales, rails and posts, so you count the bays yourself), as kits sold by the bay, and welded by the metre. One green D-pale kit is sold only in multiples of 10 bays, which is 27.5 m. Count the bays, add a post to close each run, add a corner post at every turn, and order the gates with the line so the finish matches.
Six runs, priced
- 25 m of 1.8 m palisade, the parts: €1,500 to €2,025.
- 50 m of 2.0 m palisade, the parts: €3,200 to €4,250.
- 100 m of 2.4 m palisade, the parts: €8,700 to €12,000.
- 10 bays (27.5 m) of the green 3 mm D-pale kit: €3,300.
- A 5 m double vehicle gate: €1,490 to €3,385.
- Four corner posts: €216 to €340.
Worked from the parts prices above, not a quote. The planner on this page does the same sum for the height and length you pick.
On top of the steel
Corner posts
€54 to €85 each
One at every change of direction, on top of the post that comes with each bay.
Pedestrian gate
€640 to €1,190
Single leaf, 1.2 m wide. Blue, red and white cost more.
Vehicle gate
€1,205 to €3,990
Double leaf, 4 to 6 m wide, 1.75 to 2.4 m high.
Post-mix concrete
€10.39 a 20 kg bag
Sets a post in 5 to 10 minutes with no mixing.
Delivery
quoted
Steel is heavy, and loads over 85 kg are priced by phone.
Fitting
priced on a site visit
The ground, the corners, the gates and the access decide it.
What moves a price up or down
- The height. A 2.4 m pale and a 3,125 mm post cost more than a 1.8 m pale and a 2,325 mm post.
- The pale. A 3 mm D pale is heavier steel than a 2 mm W pale, and costs more a metre.
- The finish. Galvanised costs least. Green and black add a little, and blue or red more.
- Corners and ends. Every change of direction adds a corner post, and every run needs a post to close it.
- Gates. A double vehicle gate adds €1,205 to €3,990 to the steel, and a pedestrian gate €640 to €1,190.
- The ground. Rock, soft ground, a slope or an old fence to lift all change the fitting.
2.4 m palisade by length
The lower figure is galvanised 2 mm W pale. The higher is green 3 mm D pale. Black and green W pale sit between them.
VAT on the price
Bought on its own, palisade carries VAT at 23%, the rate in every price on this site. Supplied and fitted as a permanent fence, the job can go at 13.5%, but only while the materials cost no more than two-thirds of the price before VAT.
So a supplied-and-fitted quote can carry a different rate from a price list. Ask which rate is in the figure. VAT on palisade fencing.
What a good quote includes
Ten things to see in writing. They are what make two quotes comparable.
- The height and the grade. 1.8, 2.0 or 2.4 m, general purpose or security purpose, and the standard named.
- The pale. W or D section, its thickness in millimetres, and the head: triple point, single point or round.
- The finish. Galvanised, or galvanised and powder coated, with the RAL number of the colour.
- The length and the bays. Metres of fence, the number of 2.75 m bays, and every corner and end post.
- The posts. Dug in and concreted, with the footing size, or bolted down where the ground calls for it.
- The fixings. The anti-tamper bolts and nuts, named on the quote.
- The gates. Pedestrian or vehicle, swing or sliding, the width, which way each opens and its posts.
- The ground. Slopes, rock, soft ground or an old fence to take out, and whether each is in the price.
- The VAT. The rate charged, and whether the figure is supply only or supplied and fitted.
- The dates. When the steel arrives and how many days the fitting takes.
Questions before you order
How much does palisade fencing cost per metre?
The steel for a palisade fence costs €60 to €81 a metre at 1.8 m high, €64 to €85 a metre at 2.0 m and €87 to €120 a metre at 2.4 m, with VAT. That is the pales, rails and posts, supply only. Corner posts, gates and delivery are on top, and the fitting is priced on a site visit.
How much is 100 m of palisade fencing?
At 2.4 m, the parts come to €8,700 to €12,000 with VAT. At 1.8 m, €6,000 to €8,100. Gates, corner posts, delivery and the fitting are on top.
Is palisade priced by the bay or by the metre?
Both are used. A bay is 2.75 m. A 2.4 m bay of parts is €239 to €330 a bay, which is €87 to €120 a metre.
Why is there no fitted price per metre?
Because no fixed figure holds for every site. Two fences of the same length price differently once the ground, the corners, the gates and the access are counted, so the contractor prices it after walking the line.
How much is a palisade gate?
€640 to €1,190 for a single pedestrian gate and €1,205 to €3,990 for a double vehicle gate, with VAT.
Do the prices include VAT?
Yes, at 23%, the rate for fencing bought on its own. A supplied-and-fitted job can go at 13.5% if the materials stay within two-thirds of the price before VAT.
Which finish costs least?
Galvanised. At 2.4 m the parts are about €87 a metre galvanised, against €90 green and €92 black.
How many pales are in a bay?
17, on two rails and one post, across 2.75 m.
Everything on this site
The fence and its parts
Cost and the work
Rules and where it goes

See the price of the steel before anyone rings
Pick the height, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
