Palisade fence panels: welded or bolted
Palisade is sold as welded panels, with the pales welded to the rails before the finish goes on, or as bolted parts put together on site. Welded 3 mm D pale costs €115 a metre galvanised. Bolted 2 mm W-pale parts cost €87 to €92 a metre at 2.4 m, with VAT. A panel, or bay, is 2.75 m from post to post.
How each is made, what it costs, how a panel is counted and which suits where.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- €115 a metrewelded 3 mm D pale
- €87–€92 a metrebolted 2 mm W pale, 2.4 m
- 2.75 ma panel, post to post
- 10 baysthe least one kit is sold in

Welded or bolted
Welded panels
- How it is made
- Pales welded to the rails before galvanising
- What the maker claims
- Extra strength and security, and quicker to put up
- A bent pale
- Part of the panel
- 2.4 m price
- €115 a metre, 3 mm D pale
Bolted parts
- How it is made
- Pales bolted to the rails on site
- What the maker claims
- Every part replaceable on its own
- A bent pale
- Unbolt it and fit a new one
- 2.4 m price
- €87 to €92 a metre, 2 mm W pale
Price your palisade fence
Three taps and the price of the steel shows as you go. Your name and number come last, and only if you want a contractor to price the job.
2.4 m steel palisade, 25 to 100 m, supplied and fitted: €2,175 to €12,000.
How the price is worked out
The figure is what Irish sellers charge for the pales, rails and posts of a palisade run, a metre with VAT, times the length you pick. It covers galvanised, green and black, so it is a range. Corner posts, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Fences of 3 m and over, and GRP, are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after walking the line.
A panel, counted
Palisade goes up in bays 2.75 m wide. Each bay takes 17 pales, two rails and one post, and a straight run needs one more post to close it. A corner post goes at every change of direction. The two rails are 2,710 mm long, sized to the 2.75 m bay. Panels and kits are priced by the bay, and single parts by the piece.
Kits sold by the panel
One green 3 mm D-pale kit is €330 a 2.75 m section and is sold only in multiples of 10, which is 27.5 m for €3,300. Measure the line, divide by 27.5 and round up. A short run or an odd length is made up from single parts.
Which suits where
Welded panels go up faster, the maker says, and their pales are fixed to the rails for good. Bolted parts suit a line that will be extended or repaired, because each pale, rail and post is sold on its own. GRP palisade comes as finished panels too. GRP palisade.
More of the fence
Steel palisadePales, rails and posts in 2.75 m bays. The parts start from €60 a metre.
Pales: W and D sectionThe two pale shapes, how thick they are and the heads on top.
GalvanisedHot-dip zinc, the working finish for yards, depots and compounds.
Powder coatedGreen, black and other RAL colours, put on over the galvanising.
Palisade gatesPedestrian gates from €640, double vehicle gates from €1,205.
GRP palisadeA fence that carries no current, for power, rail and water sites.Questions before you order
What is a palisade fence panel?
One bay of fence: 17 pales on two rails, 2.75 m from post to post. Welded panels come in one piece.
How wide is a palisade panel?
2.75 m between post centres.
Are welded palisade panels stronger?
The maker says welding the pales to the rails adds strength and security and speeds up the fitting.
How much is a palisade panel?
A 2.4 m bay of parts is €239 to €330 a bay with VAT. The green 3 mm D-pale kit is €330 a bay.
Can I buy one panel?
Single parts, yes. The kit priced here is sold in lots of 10 bays.
Everything on this site
The fence and its parts
Cost and the work
Rules and where it goes

See the price of the steel before anyone rings
Pick the height, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
