Palisade fencing questions, answered
Cost, pales, posts, finishes, gates, planning and VAT, in one place.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- €87–€120 a metre2.4 m palisade, the parts
- 2.75 ma bay, post to post
- 17pales in a bay
- 2 mthe usual limit away from a house
Price your palisade fence
Three taps and the price of the steel shows as you go. Your name and number come last, and only if you want a contractor to price the job.
2.4 m steel palisade, 25 to 100 m, supplied and fitted: €2,175 to €12,000.
How the price is worked out
The figure is what Irish sellers charge for the pales, rails and posts of a palisade run, a metre with VAT, times the length you pick. It covers galvanised, green and black, so it is a range. Corner posts, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Fences of 3 m and over, and GRP, are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after walking the line.
Every question
How much does palisade fencing cost in Ireland?
The steel for a palisade fence costs €60 to €81 a metre at 1.8 m high, €64 to €85 a metre at 2.0 m and €87 to €120 a metre at 2.4 m, with VAT. That is the pales, rails and posts, supply only. Corner posts, gates and delivery are on top, and the fitting is priced on a site visit.
How much is palisade fencing per bay?
A 2.75 m bay of parts is €164 to €222 a bay at 1.8 m, €176 to €233 a bay at 2.0 m and €239 to €330 a bay at 2.4 m, with VAT.
How much is a palisade gate?
€640 to €1,190 for a 1.2 m pedestrian gate and €1,205 to €3,990 for a double vehicle gate, with VAT.
What is the difference between W and D section pales?
W pales are folded into a corrugated W profile. D pales have a rounded D profile and are often 3 mm against 2 mm for W.
How many pales are in a palisade bay?
17, on two rails and one post, across 2.75 m.
How deep are palisade posts set?
Dig-in posts are longer than the fence, and the extra length is concreted into the ground: 2,325 mm posts carry a 1.8 m fence, 2,600 mm a 2.0 m fence and 3,125 mm a 2.4 m fence. One maker's drawing for a 1.8 m fence shows 525 mm in a 300 x 600 mm concrete footing.
What heights does palisade come in?
1.8 m, 2.0 m and 2.4 m in general purpose systems, and 3 m and 3.6 m in the security purpose grade of BS 1722-12.
What standard is palisade built to?
The standard for steel palisade is BS 1722-12:2016. It has two grades: general purpose fences up to 2.4 m, and security purpose fences of 3 m and 3.6 m, all with posts at 2.75 m centres.
Is galvanised or powder coated better?
Galvanised suits yards and compounds. Powder coat over the zinc adds colour and a second layer of protection.
What colours does palisade come in?
Galvanised, or powder coated in green (RAL 6005), black (RAL 9005), blue, red, white or grey, depending on the system.
Do I need planning permission for palisade fencing?
At a house, a palisade fence needs planning permission at any height: the exemption for house boundaries rules out metal palisade. In cities and towns, a new fence away from a house is exempt only up to 1.2 m, or the height of the fence it replaces, and never above 2 m. On rural land the limit is 2 m, or 3 m for deer farming or conservation.
What VAT is charged on palisade?
Bought on its own, palisade carries VAT at 23%, the rate in every price on this site. Supplied and fitted as a permanent fence, the job can go at 13.5%, but only while the materials cost no more than two-thirds of the price before VAT.
Can palisade go on a slope?
Yes. The bays are stepped: each one is set level and the line steps down from post to post.
What is GRP palisade?
Palisade made of glass reinforced plastic. It does not conduct electricity or corrode, so it suits power, rail and water sites.
Can a damaged palisade fence be repaired?
Yes. Pales, rails and posts are sold one at a time, so a bent pale or a bay is replaced without taking the line down.
How long does it take to get palisade?
Suppliers list palisade parts for delivery in 7 days to 4 weeks, depending on the system, and stock gates in about 14 days. Ask the contractor for both dates on the quote.
What happens after I send my fence?
A single fencing contractor in your county, who already has your answers and our price. Your details go nowhere else. The contractor walks the line, prices the job in writing, and you decide whether to go ahead.
Everything on this site
The fence and its parts
Cost and the work
Rules and where it goes

See the price of the steel before anyone rings
Pick the height, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
