Steel palisade fencing
Steel palisade costs €60 to €81 a metre for the parts of a 1.8 m fence and €87 to €120 a metre at 2.4 m, with VAT. It goes up in 2.75 m bays of 17 pales on two rails, between posts concreted into the ground, and every finish starts from galvanised steel.
What the parts cost, what a bay is made of and how a line goes up.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- €60–€81 a metre1.8 m, the parts
- €87–€120 a metre2.4 m, the parts
- 2.75 ma bay, post to post
- 17pales in a bay

What a steel palisade fence is made of
Pales
€5.69 to €9.07 each
W or D section steel, 1,750 mm long for a 1.8 m fence and 2,350 mm for 2.4 m.
Rails
€21.38 to €28.34 each
50 x 50 mm steel angle, 2,710 mm long. Two to a bay.
Posts
€24.75 to €76.52 each
2,325 mm long for 1.8 m, 3,125 mm for 2.4 m. One comes with each bay.
Corner posts
€54 to €85 each
One at every turn in the line, on top of the bay posts.
The pales are cold-formed steel strip. They bolt to the rails with anti-tamper bolts and nuts, and the rails bolt to the posts. In a bolted system every part comes apart again, which is why a line can be extended or repaired one part at a time.
Price your palisade fence
Three taps and the price of the steel shows as you go. Your name and number come last, and only if you want a contractor to price the job.
2.4 m steel palisade, 25 to 100 m, supplied and fitted: €2,175 to €12,000.
How the price is worked out
The figure is what Irish sellers charge for the pales, rails and posts of a palisade run, a metre with VAT, times the length you pick. It covers galvanised, green and black, so it is a range. Corner posts, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Fences of 3 m and over, and GRP, are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after walking the line.
Metal palisade, bay by bay
Metal palisade and steel palisade are the same fence. The bay figures cover galvanised, green and black. The only palisade that is not metal is GRP, the plastic version for sites beside electrical plant. GRP palisade.
How it goes up
- Set out. The line, the corners, the gate openings and every post position at the bay width are marked on the ground.
- Posts in concrete. Each post goes in a dug hole, is concreted, and is checked for line and plumb before the concrete sets.
- Rails as you go. The rails are bolted to the last post as each new one goes in. That keeps every bay the same width.
- Pales last. The pales are bolted along the rails, bay by bay.
The work in detail: palisade fencing installation.
What to check before you order
- Height and grade. General purpose up to 2.4 m, security purpose at 3 m and 3.6 m.
- Pale section. W or D, and the thickness in millimetres.
- Finish. Galvanised, or galvanised with a powder coat, and the RAL colour.
- Post count. One a bay, one to close each run, one at each corner.
- Fixings. Anti-tamper bolts and nuts named on the order.
The rule that applies
Steel palisade counts as a security fence in the planning rules. At a house it needs permission at any height. Round a business in a city or town, a new one is exempt only to 1.2 m, so most palisade lines there need permission. Planning permission for palisade.
More of the fence
Pales: W and D sectionThe two pale shapes, how thick they are and the heads on top.
GalvanisedHot-dip zinc, the working finish for yards, depots and compounds.
Powder coatedGreen, black and other RAL colours, put on over the galvanising.
Palisade gatesPedestrian gates from €640, double vehicle gates from €1,205.
GRP palisadeA fence that carries no current, for power, rail and water sites.Questions before you order
How much is steel palisade fencing?
Steel palisade costs €60 to €81 a metre for the parts of a 1.8 m fence and €87 to €120 a metre at 2.4 m, with VAT. It goes up in 2.75 m bays of 17 pales on two rails, between posts concreted into the ground, and every finish starts from galvanised steel.
Is metal palisade the same as steel palisade?
Yes. The metal is galvanised steel, with or without a powder coat. GRP is the non-metal kind.
How many pales are there per metre?
About six. A 2.75 m bay holds 17 pales.
Can I put up steel palisade myself?
It is sold as supply only. The posts are concreted at 2.75 m centres and checked for line and plumb, and the rails go on as each post goes in.
What holds the pales on?
Anti-tamper bolts and nuts through the pales into the rails.
Everything on this site
The fence and its parts
Cost and the work
Rules and where it goes

See the price of the steel before anyone rings
Pick the height, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
