Palisade fence posts and footings
Dig-in posts are longer than the fence, and the extra length is concreted into the ground: 2,325 mm posts carry a 1.8 m fence, 2,600 mm a 2.0 m fence and 3,125 mm a 2.4 m fence. Inter posts cost €24.75 to €76.52 and corner posts €54 to €85 with VAT. One maker's drawing for a 1.8 m fence sets the post 525 mm deep in a 300 x 600 mm concrete footing.
How long the posts are, how many a run takes, how they are set and what they cost.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- 2,325 mmpost for a 1.8 m fence
- 3,125 mmpost for a 2.4 m fence
- 300 x 600 mmone maker's footing, 1.8 m
- €10.39a 20 kg bag of post-mix

Post lengths
The extra length is the part that goes into the ground and the concrete. A taller fence takes a longer post, set deeper.
Inter posts, end posts and corner posts
Inter post
€24.75 to €76.52 each
One comes with each 2.75 m bay. Galvanised to black, 1.8 m to 2.4 m.
End post
€24.75 to €76.52 each
One more inter post closes the end of every straight run.
Corner post
€54 to €85 each
One at every change of direction.
Count them before you order: a run of ten bays takes eleven posts, and every corner adds a corner post.
Price your palisade fence
Three taps and the price of the steel shows as you go. Your name and number come last, and only if you want a contractor to price the job.
2.4 m steel palisade, 25 to 100 m, supplied and fitted: €2,175 to €12,000.
How the price is worked out
The figure is what Irish sellers charge for the pales, rails and posts of a palisade run, a metre with VAT, times the length you pick. It covers galvanised, green and black, so it is a range. Corner posts, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Fences of 3 m and over, and GRP, are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after walking the line.
The footing
One Irish maker's drawing of a 1.8 m component fence shows 1,800 mm above ground and 525 mm embedded, in a concrete footing 300 mm across and 600 mm deep, with 20N concrete in normal ground conditions. The standard for palisade is written for level, normal ground too, so rock, soft ground or a slope changes the footing.
Post-mix concrete comes in 20 kg bags at €10.39 a bag with VAT. It needs no mixing, sets a post in 5 to 10 minutes, and comes 80 bags to a pallet.
Dug in or bolted down
Palisade posts are dug in and concreted on the systems priced here, and so are the gate posts. Bolt-down posts can be had for gates: ask for them by name, and ask what they fix to.
More of the fence
Steel palisadePales, rails and posts in 2.75 m bays. The parts start from €60 a metre.
Pales: W and D sectionThe two pale shapes, how thick they are and the heads on top.
GalvanisedHot-dip zinc, the working finish for yards, depots and compounds.
Powder coatedGreen, black and other RAL colours, put on over the galvanising.
Palisade gatesPedestrian gates from €640, double vehicle gates from €1,205.
GRP palisadeA fence that carries no current, for power, rail and water sites.Questions before you order
How long are palisade fence posts?
2,325 mm for a 1.8 m fence, 2,600 mm for 2.0 m and 3,125 mm for 2.4 m.
How much is a palisade post?
€24.75 to €76.52 for an inter post and €54 to €85 for a corner post, with VAT.
How deep are palisade posts concreted?
The extra length below the fence goes in the ground: 525 mm for a 1.8 m fence in one maker's drawing, in a 300 x 600 mm footing.
How many posts do I need?
One for each 2.75 m bay, one more to close each run, and a corner post at every turn.
Can palisade posts be bolted down?
Bolt-down posts are made for gates. The fence posts on the systems priced here are dug in.
Everything on this site
The fence and its parts
Cost and the work
Rules and where it goes

See the price of the steel before anyone rings
Pick the height, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
